4.
Press and hold one
of
the
six
numbered buttons until
you hear a chime.
A
preset number will appear
on
the display. The sound will mute. When
it
returns,
release the button. Whenever you press that
numbered button, the station
you
set will return.
5.
Repeat the steps for each pushbutton.
seconds until PRESET
SCAN
appears
on
the display to
listen
to
each of your preset stations for
a
few seconds
(Factory presets which have not been reprogrammed
with your stations will be ignored). The radio
will
go to
the first preset station stored on your pushbuttons, stop
for
a
few
seconds, then go on to the next preset station.
Press
SCAN
again
to
stop scanning.
If
a
preset station
has weak reception, the radio
will
not stop
at
the
preset station.
ESET
SCAN:
Press and
hold
SCAN
for
two to three
ASS:
Press this knob lightly
so
it extends.
Turn
the
knob
clockwise
to
increase and counterclockwise to
decrease
bass.
T
:
Press
this
knob lightly
so
it
extends.
Turn
the
knob
clockwise to increase and counterclockwise to
decrease treble.
If
a
station
is
weak
or
noisy,
you
may
want to decrease the treble.
Push these knobs back into their stored positions when
you're not using them.
SP:
The Digital Signal Processing
(DSP)
feature
is
used
to
produce four audio effects. These include
TALK,
DRIVER
SEAT,
LIVE
and
AUDITORIUM.
DSP
can
be
used while listening to
the
radio,
the
cassette tape player or the
CD
player.
To
activate
DSP,
press the
DSP
button. Press this button again to go
through the
four
effects.
To
turn the
DSP
feature
off,
press
OFF.
TALK:
This setting
is
used when listening to
non-musical material such as baseball games, talk
shows
or
news.
TALK
gives the best clarity
of
spoken words. The high and low frequencies
are
lowered,
the
mid-range
is
increased and the audio
is
moved more toward the front speakers.
DRIVER SEAE
This
setting adjusts
the
audio to
give
the
driver the best possible sound qualities. This
has been done by tailoring the sound arrival times
and equalization
for
the driver seat.
DRIVER
SEAT
can be used at
any
time for any material. Other
passengers
in
the
vehicle may not perceive
the
same effect.
LIVE:
This
setting
is
used to imitate the sound
of
a
live performance.
To Next Page
Loading...
