You can
also
recall
a
seat and mirror position
if
your
vehicle is not in
PARK
(I?).
Press and hold either the
1
or
2
button until seat and mirror movement is
complete. Releasing the buttons will
stop
adjustment.
The
EXIT
button can
be
programmed to allow easy exit
for
up
to two drivers. Adjust the seat to
a
comfortable
“exit” position and then press the
SET
button followed
by
the
EXIT
button. While your vehicle is in
PARK
(P),
briefly
press the
EXIT
button to recall your programmed
exit position.
Automatic seat, mirror, comfort controls and radio
movement will occur if
the
Remote Keyless Entry
(RW)
transmitter is used to enter the vehicle. The
number on the back
of
the transmitter corresponds to the
1
or
2
seat, mirror, comfort controls and radio positions.
After the unlock button
is
pressed on the RKE
transmitter (the ignition must be in
LOCK)
or
when the
key
is
placed
in
the ignition,
the
seat,
mirrors,
comfort
controls and radio will automatically adjust to the
appropriate position.
Automatic seat, mirror, comfort controk and radio
movement are programmed through
the
Driver
Information Center
(DIC)
so
that
the
driver can select
whether
or
not movement will occur using the
RKE
transmitter or
by
placing
the
ignition
key
in
the ignition.
For
more information, see “Remote Recall Memory”
in
the
Index.