Your car has a shoulder belt tightness adjustment
feature.
If
the shoulder belt seems too tight, adjust it
before
you
begin to drive.
1.
Sit
well
back in the seat.
2.
Start
pulling
the
shoulder belt out.
-.
,
.
,
. . .
..
,
..
4.
Let the belt go back
all
the way.
You
should hear a
slight clicking
sound.
If
you don’t, the adjustment
feature won’t set, and
you’ll
have to start again.
5.
Now
you can add a small amount of slack.
Lean
forward slightly, then sit back.
If
you’ve added more
than
1
inch
(25
mm)
of slack,
pull
the shoulder belt
out
as
you
did
before
and
start
again.
3.
Just before
it
reaches the end, give
it
a quick pull.
If
you move around
in
the vehicle enough, pull out
the
shoulder belt, or open your door, the belt
will
become
tight again.
If
this
happens, you can reset
it.
5
I
To Next Page
Loading...
