FIRST
(I):
This
position gives
you
even
more
power
than
SECOND
(2).
You can
use
it
on very steep hills,
or
in deep
snow
or mud. (If the shift lever is put in
FIRST
(I),
the transaxle won’t shift into gear until the
vehicle
is
going slowly enough.)
If
your front wheels can’t rotate, don’t
try
to
drive. This might happen
if
you were stuck in
very deep
sand
OF
mud
or were
up
against
a
solid
object.
You
codd
damage your transaxle.
Also,
if
you stop when going uphill, don’t hold
your vehicle there with only the accelerator
pedal. This could cause overheating and damage
the transaxle. Use
your
brakes to hold
your
vehicle in position
on
a
hill.
1
ar
e
Hold the regular brake
pedal down with your
right
foot and push
down
the
parking
brake pedal with
your
left
foot to set the
parking brake. If the
ignition is
on,
the
PARK
BRAKE
indicator light
should come
on.
If
it
doesn’t, you need to have
your vehicle serviced.
If the
parking
brake
has
not
been
fully
released
and
you
try
to
drive
off
with
the parking brake
on,
the
PARK
BRAKE
indicator light comes
on
and stays
on.
See
“Barking Brake Indicator Light” in the Index for
more information.
When
you move out
of
PARK
(P)
or
NEUTRAL
(N),
if
the
engine is
running,
the
parking
brake should release.
If
it
doesn’t,
you
can
manually release
the
parking
brake.
To Next Page
Loading...
