5-7
9. Now connect the black
negative (
-) cable to
the good battery’s
negative (-) terminal.
Don’t let the other end of the negative (
-) cable touch
anything until the next step. The other end of the
negative (-) cable doesn’t go to the dead battery.
10. Your vehicle has a remote negative terminal,
marked “GND”, located near the power steering
fluid reservoir. Attach the cable to the remote
negative terminal provided.
11. Now start the vehicle with the good battery and run
the engine for a while.
12. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.
13. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don’t touch
each other or any other metal. Replace the red
positive (+) remote terminal cover to its
original position.
To Next Page
Loading...
Need help?
General
