6-43
Front Cornering Lamps
1. Follow Steps 1 through 5 in “Headlamps”
described previously.
2. Disconnect the cornering lamp bulb by pulling the
bulb out of the socket. Do not twist or turn the bulb.
3. Replace cornering lamp bulb by pushing the bulb
directly into the socket.
4. Reinstall the cornering lamp housing socket back
into the headlamp assembly.
5. To reinstall headlamp assembly, see Steps 1 through
5 in reverse in “Headlamps”described previously.
Front Turn Signal Lamps
1. The turn signal lamps are located beside the
headlamps. To access, lift off the bulb socket dust
cover. (See Step 1 under “Headlamps.”)
2. Press the tab down and turn the housing socket
clockwise to unlock the socket from the
lamp housing.
To Next Page
Loading...
Need help?
General
