6-43
5. Turn the vertical aiming screw (C) until the
headlamp beam is aimed to the horizontal tape line.
Front Cornering Lamps
1. Follow Steps 1 through 4 in “Headlamps”
described previously.
2. Disconnect the cornering lamp bulb by pulling the
bulb out of the socket. Do not twist or turn the bulb.
3. Replace cornering lamp bulb by pushing the bulb
directly into the socket.
4. Reinstall the cornering lamp housing socket back
into the headlamp assembly.
5. Reverse Steps 1 through 4 in “Headlamps”
described previously.
To Next Page
Loading...
