Central Door Unlocking System
The vehicle has a central door unlocking mode. When
unlocking the driver door, the other doors can be
unlocked at the same time by turning the key clockwise
in the door lock cylinder twice.
Power Door Locks
With power door locks, the switches on the front doors
can be used to lock and unlock the vehicle.
K (Unlock): Press to unlock the doors.
Q (Lock): Remove the key from the ignition and press
to lock the doors.
Programmable Automatic Door
Locks
The vehicle is programmed so that, when the doors are
closed, the ignition is on, and the shift lever is moved
out of P (Park), all the doors will lock. The doors will
unlock every time the vehicle is stopped and the shift
lever is moved into P (Park).
If someone needs to get out while the vehicle is not in
P (Park), have the person use the manual lock knob or
power door lock switch. When the door is closed again,
it will not lock automatically. Use the manual lock knob
or power door lock switch to lock the door.
The door locks can be programmed through prompts
displayed on the Driver Information Center (DIC). These
prompts allow the driver to choose various lock and
unlock settings. For programming information, see DIC
Vehicle Customization on page 4‑77.
Rear Door Security Locks
Rear door security locks prevent passengers from
opening the rear doors from the inside.
The rear door security locks are located on the inside
edge of each rear door. The rear doors must be opened
to access them.
3-10
To Next Page
Loading...
Need help?
General
