3-54 Seats and Restraints
5. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt,
and feed the shoulder belt back
into the retractor. When installing
a forward-facing child restraint, it
may be helpful to use your knee
to push down on the child
restraint as you tighten the belt.
6. Before placing a child in the
child restraint, make sure it is
securely held in place. Refer to
your child restraint manufacturer
instructions.
If the vehicle is equipped with the
passenger sensing system, and
when the passenger sensing system
has turned off the front passenger
frontal airbag, the off indicator in the
passenger airbag status indicator
should light and stay lit when you
start the vehicle. See Passenger
Airbag Status Indicator on
page 5-14.
If a child restraint has been installed
and the on indicator is lit, see “If the
On Indicator is Lit for a Child
Restraint” under Passenger Sensing
System on page 3-31 for more
information.
To remove the child restraint,
unfasten the vehicle safety belt and
let it return to the stowed position.
To Next Page
Loading...
