40 Keys, Doors, and Windows
Key Cylinder Access
To access the key cylinder:
1. Pull the door handle to the
open position.
2. Insert the key into the slot on
the bottom of the cap and pry
outward.
3. Move the cap rearward and
remove.
To replace the cap:
Pull the door handle open and insert
the tabs (1) on the rear of the cap
into the space between the seal (2)
and the metal base (3). Snap into
place.
Power Door Locks
Q (Lock) : Press to lock the doors.
The indicator light in the switch will
illuminate when activated.
K (Unlock) : Press to unlock the
doors.
Delayed Locking
This feature delays the actual
locking of the doors until
five seconds after all doors are
closed.
To Next Page
Loading...
