3-11
The DSP settings are unique to each source, and they
must be set individually for each source. For example,
you may have Talk selected for a preset radio station,
but if you change to the CD changer, Spacious may
be selected.
You can also store separate DSP settings for each preset
station. See “Setting Preset Stations” following and
“Playing a Compact Disc (CD)” later in this section for
more information.
AVC (Automatic Volume Compensation): This feature
monitors the noise in the vehicle. Then, AVC
automatically adjusts the volume level so that it always
sounds the same to you.
To turn AVC on and off, press the AVC multi
-function
button.
Setting Preset Stations
The six multi-function buttons next to the display allow
you to store your favorite radio stations. You can set
up to 18 different preset stations, six per band, FM1,
FM2 and AM. The Home and Away presets each have
18 separate presets. For more information on the Home
and Away feature, see “FM Menu” listed previously in
this section.
To store a radio station as a preset, use the following steps:
1. Select the band where you want the preset stored by
pressing the BAND button.
2. Select either the Home or Away presets. See “FM
Menu” listed later in the section for more
information on the Home and Away feature.
3. Tune to the desired station using the TUNE/SEL
knob or the SEEK/SCAN switch.
4. Choose the equalization and DSP settings you want.
See “Setting the Tone” listed previously for more
information.
5. Press and hold the multi
-function button next to the
preset you want.
You will hear a beep when the preset has been stored,
and the frequency of the stored station will appear on
the preset prompt at the right of the display.
6. Repeat the steps to store other presets.
To select a stored preset station listed on the screen, press
the multi
-function button next to the station prompt.
The station will change, and the new radio station
frequency will be displayed in the center of the screen.
To Next Page