Cadillac CTS 2011 - Page 73

Black plate (5,1)
Cadillac CTS/CTS-V Owner Manual - 2011
Seats and Restraints 3-5
.
Raise or lower the rear part of
the seat cushion by moving the
rear of the horizontal control up
or down.
.
Raise or lower the entire seat by
moving the entire horizontal
control up or down.
The vertical control is used for
reclining the seatback. See “Power
Reclining Seatbacks” under
Reclining Seatbacks
on page 3‑8
for more information.
Memory Seat, Mirrors, and
Steering Column
On vehicles with the memory
package, memory buttons 1 and 2
on the driver door are used to save
and recall memory settings for the
driver seat cushion and seatback,
outside mirrors, and the steering
column position, if the vehicle is
equipped with the power tilt and
telescopic steering column.
1: Saves and recalls for driver 1.
2: Saves and recalls for driver 2.
S (Exit Button): Moves the driver
seat and/or power steering column
to the exit position. See “Exit Recall”
later in this section for more
information.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until two
beeps sound.
3. Repeat for a second driver
using “2.”
The vehicle comes with two keyless
entry transmitters. Each transmitter
has a number “1” or “2” on it. These
numbers correspond to “1” and “2”
on the driver door. The current
driver is identified when the unlock
button on the transmitter is pressed,
or when “1” or “2” on the driver door
is pressed.