14
RECALL FRONT-SEAT MEMORY POSITIONS
Press and hold button 1, 2 or Exit until the set position
is reached.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/off (for exit recall,
the driver’s door must be opened).
To set the recall options, go to Settings > Vehicle > Seating
Position > Seat Entry Memory and Seat Exit Memory.
RECLINE THE REAR
SEAT
To recline the
seatback, pull the
lever (A) on top of the
seatback and move
the seatback to the
desired position.
Release the lever.
FOLDING REAR SEAT
Pull the lever (A) on the top of the seatback and fold the
seatback forward. A red tab near the lever is visible when
the seatback is unlatched.
To fold a rear seat from the cargo area, press and hold the
left or right Seat Release
♦
button on the side trim of the
cargo area.
To raise the seatback, lift it up until it locks in place.
See Seats and Restraints in your Owner’s Manual.
SEAT FEATURES
FRONT-SEAT ADJUSTMENTS
A. Seatback Recline
B. Seat Adjustment
C. Lumbar Support/
Seat Massage
♦
FRONT-SEAT
MASSAGE
♦
Rotate the feature
select knob (C) on the
door panel to view massage settings on the infotainment
screen. Move the knob (up, down, left, right) to adjust the
selected setting.
Press the feature select knob (C) on the door panel to
activate the most recent massage setting or turn off the
active massage.
SET FRONT-SEAT MEMORY POSITIONS
With the vehicle powered on or in Accessory mode:
1. Adjust the driver’s seat and power outside mirrors or the
front-passenger's seat
♦
to the desired positions.
2. Press and release the SET button on the driver’s door or
front-passenger's door.
3. Immediately press and hold button 1 or 2 until two beeps
sound. For the driver's seat, use the button that matches
the Driver Information Center welcome message indicating
driver 1 or 2.
To store a seat position for exiting the vehicle, repeat the
steps using the
Exit button.
C
A
B
A
To Next Page
Loading...
