11
BLUETOOTH® SYSTEM
WIRELESS PHONE CHARGING
♦
The Wireless Phone Charging system is located under the
center console armrest. To check phone compatibility, visit
cadillac.com/support. See your phone retailer for required
phone accessories or charging adapters.
1. The vehicle must be On or Retained Accessory Power must
be active.
2. Remove all objects from the charging pad.
3. Place the phone,
screen up, on the pad.
4. The charging symbol
will display on the
infotainment screen. If
not charging, remove
the phone for 3
seconds, and rotate it
180 degrees, before
placing it on the
charging pad again.
See Instruments and Controls in your Owner's Manual.
Read your Owner's Manual for important information about using the
Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must
be paired with the in-vehicle Bluetooth system. Not all devices
will support all functions. The vehicle must be stopped to pair a
device. For more information, visit cadillac.com/support.
PAIR A PHONE
1. Press the Push to Talk button to start the pairing
process on the infotainment screen (if a phone is not
connected).
To use the infotainment screen, select the Phone icon >
Manage Phones > +Add Phone.
2. Start the pairing process on the phone. From your
phone's Bluetooth settings, select the name shown on the
infotainment screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone screen is displayed.
FIRST TO CONNECT
Multiple phones can be paired to the Bluetooth system. The
system connects to the phone that is set to First to Connect.
To set the First to Connect phone, go to Settings >
Connections > Phone > Options.
See Infotainment System in your Owner's Manual.
Some equipment shown may not be included in your vehicle.
♦ Optional equipment
To Next Page
Loading...
