CLIMATE CONTROLS 199
On/Off : Touch On/Off on the display
to turn the rear climate control on or
off. If the rear climate control is
turned off using On/Off on the display,
the rear climate control buttons must
be pressed twice to turn the system
back on.
Sync : Touch Sync on the display to
match the rear climate control
settings to the front climate control
driver settings. The Sync button is
highlighted. Press the temperature or
AUTO button twice to unlink the set
driver and rear settings. The Sync
button is no longer highlighted.
Q : Touch to lock or unlock control of
the rear climate control system from
the rear seat passengers. When locked,
the rear climate controls can only be
adjusted from the front seat.
Automatic Operation
AUTO : Press to turn on or off. The
air delivery is controlled
automatically. The AUTO indicator
appears on the display. If the air
delivery mode or fan speed is
manually adjusted, this cancels full
automatic operation.
Manual Operation
] : Press the rear fan control up or
down to increase or decrease the
airflow to the rear panel outlets.
Temperature Controls : Press up or
down to adjust the rear passenger
temperature. The rear passenger
temperature can also be adjusted by
touching
Q for warmer air or R for
cooler air on the rear climate display.
Air Delivery Mode Control : Press up
or down to select the desired air
delivery mode. The air delivery mode
can also be changed by touching
[,
\, or Y on the rear climate display.
This changes the direction of the
airflow in the rear seating area.
If the rear floor air delivery mode is
selected, the rear fan speed indicator
will change when adjusted, but the
airflow amount directed to the floor
will not. This is normal operation for
the system.
To activate the rear floor air deliver y
mode, touch
[ on the rear climate
display.
Air Vents
Use the slider switch on the air outlets
to change the direction of the airflow,
or to open and close off the airflow.
There are also outlets overhead in the
rear passenger area; adjust as needed.
Keep all outlets open whenever
possible for best system performance.
Operation Tips
.
Clear away any ice, snow, or leaves
from the air inlets at the base of the
windshield that can block the flow
of air into the vehicle.
.
Clear snow off the hood to improve
visibility and help decrease moisture
drawn into the vehicle.
.
Use of non-GM approved hood
deflectors can adversely affect the
performance of the system.
.
Keep the path under all seats clear
of objects to help circulate the air
inside the vehicle more effectively.
.
If fogging reoccurs while in vent or
bi-level modes with mild
temperature throughout the vehicle,
turn on the air conditioner to
reduce windshield fogging.
To Next Page
Loading...
