2
SAFETY PRECAUTIONS
As the owner and / or operator it is ultimately your responsibility to insure personal
safety and to operate this machine in a safe manner. Your good judgment and the following
precautions will help you to avoid costly accidents and minimize personal risk.
• DO NOT move or operate this machine until you have read and understand the instruc-
tions in this manual.
• NEVER allow untrained persons to operate this machine.
• DO NOT attempt to service this machine while it is in operation.
• MAKE CERTAIN all mechanical and hydraulic tension has been released before attempt-
ing to service the machine.
• CHECK all nuts and bolts regularly for tightness.
• PERFORM REQUIRED MAINTENANCE as prescribed or as necessary to keep this ma-
chine in safe operating condition.
• KEEP ALL SPECTATORS at a safe distance.
• STAY CLEAR of high pressure supply lines, especially when first pressurizing the system.
• DO NOT remove or alter any of the shielding from this machine.
• BE CERTAIN that the machine is securely anchored (using the stabilizer legs) before un-
spooling the hose.
• KEEP WELL CLEAR of all moving parts.
• NEVER tow this machine at speeds greater than 10 MPH / 15 KPH and be certain the tow
vehicle has adequate braking capacity to maintain safe control at all times.
GENERAL PRECAUTIONS
“SAFETY IS JUST A WORD UNTIL PUT INTO PRACTICE”
This symbol, the safety-alert symbol, indicates a hazard and conforms to ANSI
/ ASAE S350. When you come across the safety-alert symbol in this manual,
make certain you fully understand and abide by the given instructions.
Keep the chassis of the machine on firm and level ground. A Cadman Traveller
has a high center of gravity. It is essential that it be operated from a stable posi-
tion to prevent roll over.