How to fix a Caffitaly System S8003 Coffee Maker when the coffee is not hot enough?
If the coffee from your Caffitaly System Coffee Maker is not hot enough, it could be due to a couple of reasons: * Cold cups/espresso cups: Preheat the cup. * Scale build-up in the machine: Descale the machine.
What to do if I can't lower the lever on my Caffitaly System Coffee Maker?
If you cannot lower the lever on your Caffitaly System Coffee Maker, it is likely because a capsule is stuck inside the machine. Remove the stuck capsule to resolve this issue.
What to do if my Caffitaly System S8003 Coffee Maker stops during dispensing?
If your Caffitaly System Coffee Maker starts to dispense coffee but then stops or only dispenses a small amount, it might be due to incorrect programming of the coffee amounts. To resolve this, reprogram the amount for the button.
Why is my Caffitaly System Coffee Maker coffee dispensing slowly and of poor quality?
If the coffee from your Caffitaly System Coffee Maker is dispensing very slowly and is of poor quality, it could be that the button (H) was used with an espresso capsule. Make sure to use the appropriate buttons for espresso coffee.
General| Brand | Caffitaly |
|---|---|
| Model | S8003 |
| Category | Coffee Maker |
| Type | Capsule Coffee Machine |
| Pressure | 15 bar |
| Capsule System | Caffitaly |
| Color | Black |
| Water Tank Capacity | 1.2 liters |
Identifies and describes all external components and controls of the coffee machine.
Explains the meaning of warning and information symbols used in the manual.
Provides contact details for Caffitaly System support.
Details essential safety rules to prevent accidents and appliance damage.
Guides on correct appliance usage and environmentally friendly disposal methods.
Step-by-step guide for initial machine setup and priming the water circuit.
Instructions on how to power on the coffee machine for the first time.
Explains common display messages like heating up and ready status.
Details indicators shown during capsule insertion and espresso dispensing.
How to access and use the machine's menu functions for settings.
Explains the process of programming desired coffee amounts for brewing.
Details indicators for automatic group cleaning cycle status.
Covers descaling alerts and how to adjust coffee temperature.
Explains alarm messages and required user interventions for common issues.
Instructions for adjusting the coffee dispenser height for different cup sizes.
Guidance on selecting buttons for various beverages and capsule types.
Step-by-step instructions for dispensing coffee from the machine.
Details how to customize the amount of coffee dispensed per brew.
How to set the desired coffee brewing temperature for your preference.
Steps for performing a short rinse or internal cleaning cycle.
Detailed instructions for cleaning the coffee dispenser unit and its parts.
How to put the machine into standby mode to reduce power consumption.
Steps for performing daily cleaning of components like the drip-tray and water tank.
Information on when and why descaling is necessary for machine maintenance.
Detailed instructions for performing the descaling cycle.
Steps for rinsing the machine's internal systems after descaling.
Key specifications of the coffee machine, such as weight and dimensions.
Solutions for common problems like coffee not being hot or slow dispensing.
To Next Page