Need help?Do you have a question about the CAH U-3650D II and is the answer not in the manual?
Covers crucial guidelines for safe operation, maintenance, and handling of the equipment.
Details the key performance features and capabilities of the wireless microphone system.
Identifies and explains the front and rear panel components of the receiver.
Provides instructions for setting up and connecting the receiver unit.
Covers LCD panel operation, frequency changing, sensitivity adjustment, and system locking.
Describes how to automatically scan for and select an interference-free channel.
Explains how to use the headphone jack for monitoring audio signals.
Identifies and explains the parts of the handheld transmitter.
Covers initial setup, frequency pairing, and general operation of the handheld unit.
Provides step-by-step instructions for replacing the batteries in the handheld transmitter.
Details the exterior and interior components of the bodypack transmitter.
Covers operating panel, microphone connection, battery installation, and frequency pairing.
Lists the technical specifications for the complete wireless microphone system.
Details technical specifications for handheld and bodypack transmitters.
Outlines the technical specifications for the receiver unit.
Provides important notes on system status, interference, power, and sensitivity.
General| Type | Dynamic |
|---|---|
| Frequency Response | 50Hz-15kHz |
| Connector | XLR |
| Cable Length | 3m |
| Color | Black |
| Impedance | 600Ω ±30% |
| Polar Pattern | Unidirectional |
To Next Page