ReValver Manual 4
Loading & Saving programs
Even though you can choose any module, they may not
be compatible with each other. The modules follow cer-
tain physical laws; for example:
The following simple rules applies to the order of
modules:
Speakers must appear after a power amp.
Studio effects must appear after a room, speakers,
preamp, or at the beginning of the chain.
Rooms (room simulation) must appear after speakers
Preamps must appear after a studio effect or at the
beginning of the chain
Power amps must appear after studio effects or preamps
The following modules do not follow any rules:
Trim pots
Parametric filters
Loading & Saving programs
By clicking ‘Load’ and ‘Store’ preset you can load or
save a configuration. The settings from each module are
saved to disk along with their internal order in the chain.
There is no limit to the number of programs that can be
saved.
To Next Page
Loading...