Need help?Do you have a question about the Cal-Royal CR3000 and is the answer not in the manual?
Covers battery requirements, low battery indicators, and remote switch inputs REM1/REM2.
Steps to reset the unit to factory defaults, including the default Master Code 12345.
Explains Master, Sub-Master, Manager, User, and Service codes, and rules for code length and entry.
Describes the keypad lockout feature after multiple invalid code entries, including reset options.
Details the audio and visual signals for various operations, statuses like access granted, invalid codes, and errors.
Instructions for changing the Master Code using Program 991, with an example.
Procedures for adding, changing, and deleting Sub-Master Codes using Programs 981 and 982.
Procedure to add or change a Manager Code using Program 1xx, with location details.
Procedures for deleting and disabling Manager Codes using Programs 2xx and 3xx.
Steps for deleting and adding/changing User Codes using Programs 2xx and 1xx.
Procedures for disabling individual User Codes or all users within a specific bank.
Functions to disable all users/managers or enable specific ones using Programs 3## and 4xx.
Procedures for enabling users in a bank or all users/managers using Program 4x# and 4##.
Setting Pass Time duration using Program 902-920 and entering 'Disable Users Only' mode.
Steps to program up to 5 single-entry Service Codes using Programs 011-015.
Procedures for deleting specific Service Codes using Programs 021-025 or all Service Codes.
Enabling Passage Mode for continuous unlocking and disabling it using Programs 961 and 962.
Use Program 009 to find the bank and user location of a stored code.
Find the next available slot for codes and configure key press sound options.
Details coverage, exclusions, liability limits, return policies, and ANSI/BHMA standards.
To Next Page
General