EasyManua.ls Logo

Calearo 7677950 User Manual

Calearo 7677950
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Vertrieb: Audiotechnik Dietz Vertriebs-GmbH, www.dietzshop.de
Art.Nr.: 7677950
antenne
INSTALLATION INSTRUCTIONS FOR DAB FOIL ANTENNA - INSTALLATIONSANLEITUNG FÜR DAB FOLIENANTENNE
COMMERCIAL
VEHICLES
Identify the suitable installation area( Bumper,
side pillar, side wall of the vehicle) and clean it
thoroughly in order to facilitate the adhesive
grip. This area must be far away from the
radiator and metallic parts.
Make sure the space is enough to comprise
the receiving element. Never fold the foil.
The Foil Antenna can be installed in both
directions, but always on a vertical surface.
Never install the antenna on a at surface.
4
Identizieren Sie den für die Installation am besten
geeigneten Bereich (Stoßstange, Fahrzeugwand)
und säubern Sie ihn sorgfältig, um den Haftgri zu
erleichtern.
Der Einbaubereich muss von Heizkörpern und
Metallteilen entfernt sein.
Stellen Sie sicher, dass der Platz ausreicht, um das
Empfangselement draufzukleben, ohne die Folie
zu falten.
Die Folienantenne kann in beide Richtungen,
aber immer auf einer senkrechten Oberäche,
eingebaut werden. Installieren Sie die Antenne
niemals auf einer ebenen Fläche.
1
2
3
1
2
3
RECREATIONAL
AUTOMOTIVE
BUS
A
B
A
Amplifier / Verstärker
B
Adhesive foil antenna / Klebefolie Antenne
Remove the protective lm a nd s tick t he f oil i n t he m ost
suitable position, as suggested for the type of installation.
Entfernen Sie die Schutzfolie von der Antenne und kleben Sie die
Folie an die für die Installationsart am besten geeignete Stelle.
4
2
3
1
Question and Answer IconNeed help?

Do you have a question about the Calearo 7677950 and is the answer not in the manual?

Calearo 7677950 Specifications

General IconGeneral
BrandCalearo
Model7677950
CategoryAutomobile Accessories
LanguageEnglish

Summary

DAB Foil Antenna Installation Guide

Installation Area Preparation and Placement

Clean installation area, ensure space, and mount on a vertical surface, avoiding flat surfaces.

Amplifier Securing and Cable Management

Secure amplifier with a screw to a metal part for ground, and manage cables to avoid overlap or interference.

Connecting Cables and Reception Testing

Connect extension cables to amplifier and car radio, then perform a reception test.

AM/FM-DAB Antenna System Wiring

Original Radio Phantom Power Setup

Connect antenna to original car radio providing phantom power for DAB+ and UKW.

Aftermarket Radio Phantom Power Adapter

Connect to aftermarket radio using phantom adapter if no phantom power is supplied.