Why won't my California Air Tools 4620AC Air Compressor motor start?
If your California Air Tools Air Compressor motor doesn't start or starts slowly, it might be due to low voltage supply. Check that the main voltage matches the air compressor's specifications. Using an extension cord that's too thin or long can cause a voltage drop. Use heavy-duty extension cords and ensure the compressor is plugged into a fully functional power outlet.
What to do if the unloader valve leaks on my California Air Tools 4620AC?
If the unloader valve on your California Air Tools Air Compressor leaks when it's idle, the unloader valve seal might be defective. Release all the pressure from the air tank, then remove the unloader valve plug and clean the valve seal. If necessary, replace the seal and reinstall all components.
How to fix a pressure drop in my California Air Tools 4620AC tank?
If you notice a pressure drop in the tank of your California Air Tools Air Compressor, it could be due to air leaks at the connections. Let the compressor build pressure, ideally to the maximum. Apply soapy water to the air connections and watch for bubbles. Tighten any connections that are leaking. If the problem continues, further assistance may be needed.
What to do if my California Air Tools Air Compressor stopped and does not start?
If your California Air Tools Air Compressor stops and won't restart, the thermal protector may have activated due to the motor overheating. Ensure the main voltage matches the compressor's specifications. A thin or long extension cord can cause a voltage drop and overheating. Also, excessive use (over 1 hour continuously) can overheat the motor. Allow the motor to cool down.
Why is my California Air Tools 4620AC not providing enough air?
If your California Air Tools Air Compressor doesn't seem to provide as much air as before, or cuts off sooner, it could be due to a tank full of water from condensation. Open the drain valve and release the water from the tank.
Defines hazard signal words like DANGER, WARNING, CAUTION, NOTICE.
Warns about injuries from moving parts of the compressor.
Details electrical safety, grounding, and cord usage.
Provides contact information for service and repair.
Advises use in ventilated areas and wearing masks for dust.
Warns about eye protection and keeping distance from air stream.
Alerts to hot surfaces and potential fire risks.
Caution regarding pressurized air and flammable materials.
Discusses sparks, flammable materials, and ventilation.
Provides specifications for safe and effective extension cord usage.
Advises placement of equipment in garages to avoid sparks.
Lists included items and provides instructions for initial assembly.
Guides users on checking the compressor for damage before use.
Advises keeping original packaging for potential returns or service.
Details proper placement, surface requirements, and clean air environment.
Details voltage, amperage, grounding, and circuit requirements for safe operation.
Provides specifications for safe and effective extension cord usage.
Brief overview of the compressor's features and benefits.
Step-by-step instructions for connecting hoses and power.
Instructions for turning on the compressor and setting airflow.
Steps for safely turning off the compressor.
Instructions for draining accumulated water from the tank.
Guides on maintaining the air filter for optimal performance.
Method for detecting air leaks in connections.
Recommendations for cleaning the unit using safe solvents.
Steps for safely storing the compressor for extended periods.
Illustrates the electrical connections within the compressor.
Shows the flow path of air through the compressor system.
Details the coverage, duration, and limitations of the product warranty.
Outlines warranty exclusions and liability limitations.
Information on how to register the product for warranty.
Guide to accessing instructional videos online.
Contact details for obtaining service and replacement parts.
General| Model | 4620AC |
|---|---|
| Tank Size | 4.6 Gallons |
| Motor Power | 1.0 HP |
| Max Pressure | 125 PSI |
| Airflow @ 90 PSI | 2.20 CFM |
| Pump Type | Oil-Free |
| Weight | 54 lbs |
| CFM at 90 PSI | 2.20 CFM |
| Horsepower (Rated/Running) | 1.0 HP |
| Noise Level | 60 decibels |
| Sound Level | 60 decibels |
| Voltage | 110V |
| Amperage | 8.5 Amps |
To Next Page