8
Basic Directions
1. Plug in the Perfecter.
2. Turn the main switch on, and adjust
the temperature setting for your preference.
NOTE: 356°F / 180°C temperature setting is recommended for thin hair
and/or damaged hair. Start using once the pilot lamp stays on
(lamp blinks until set temperature is reached).
It will take about 2-3 minutes to reach 356°F / 180°C.
3. Use on dry hair only.
4. Simply brush entire hairstyle underneath and on top, to
achieve a smoother, shinier and softer style.
OR
Section and roll each area as you would with a round brush and
blow dryer to create maximum fullness, body and bounce.
PERFECTER_IB_UK_ENG_V2_130507.indd 8 5/7/13 4:06 PM
To Next Page
