Calix GigaSpire BLAST U4 - LED States - Samsung Smart Things

Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
36
LED States - Samsung Smart Things
Samsung Smart Things
Description
Colors
Indication
ST Hub Ready for Setup
 Red & Green Flashing
LED green and Red cycles at
500 msecs.
Once set-up, reverts to gateway
previous status
If set-up is not successful,
consult Error states under Smart
Things
Set-up Error
 Flashing Red
If Set-up is not successful, cycle
red @ 500 msec,
continue flash for 30 secs, then
revert to the gateway previous
status
Searching for Sensor
Flashing Green
During search for sensor, LED
cycles green @ 500 msec. If
sensor is found, the LED reverts
to gateway previous status. If
the sensor is not found, the
blinking continues for 60 secs,
then reverts to gateway previous
status