CHARGING
1. Power GPS unit Off. Hold
[
POWER
]
until
screen goes blank.
(See unit diagram page 4)
2. Connect Charger Pins on the charger to
the Charging Ports on the unit.
Note: Charger Pins and Charging Ports
must be aligned properly (Easiest to align
while looking at back of unit).
3. Secure Charger Clamp on the charger to
Charger Socket located on opposite side
of unit.
4. Plug USB cord end into USB port.
5. When connection is
made, unit will power
on and Battery Icon
bars will pulsate
to indicate charging.
Note: Battery Icon bars will stop pulsating
when charging is complete. (2-3 hours)
ENGLISH 3
CHARGING PINS
CHARGER CLAMP
CHARGING PORTS
To Next Page
Loading...
