Need help?Do you have a question about the Calorex Variheat AW1200 and is the answer not in the manual?
Explanation of the integral controller's touchscreen interface for operation and settings.
Guidance on setting and adjusting humidity and air/water temperatures for optimal performance.
Explanation of the two operating modes and their impact on settings and energy usage.
Overview of the alarms screen for viewing system warnings and faults.
Configuring IP address, subnet mask, and gateway for network connectivity.
Configuring Modbus/RTU and BACnet MS/TP communication parameters.
Configuring BACnet/IP communication via the Ethernet port.
Accessing the Variheat via a mobile device using the Vijeo Design'Air app.
Accessing the Variheat via a networked computer using an ActiveX-enabled browser.
Specifics for connecting Low Pressure Hot Water (LPHW) to the unit.
Essential checks to ensure readiness for commissioning after installation.
Procedures for safely powering up and starting the Variheat system for the first time.
Summary of key checks and steps for commissioning the Variheat system.
List of tasks performed during scheduled maintenance visits.
General| Model | Variheat AW1200 |
|---|---|
| Type | Air to Water Heat Pump |
| Heating Capacity | 12 kW |
| Refrigerant | R410A |
| Max Water Pressure | 3 bar |
To Next Page
