10
Usage
Time Cook I
1. Place food in oven. Close door.
2. Press TIME COOK I & II pad.
3. Press number pad to select desired time, for example
for 1 minute, press 1,0,0.
If power level other than 100% is desired, press POWER
LEVEL pad and number pad. For example, for 20%
power, press 2 pad .
4. Press START pad. Oven stops, signals, and "END"
displays at end of cooking time.
Time Cook II is designed to set two time cooking functions
within one program.
1. Place food in oven. Close door.
2. Press TIME COOK I & II pad.
3. Press number pads to select first cook time. For
example, for 2 minutes 15 seconds, press 2,1,5.
If power level other than 100% is desired, press POWER
LEVEL pad and number pad. For example, for 20%
power, press 2 pad.
4. Press TIME COOK I & II pad.
5. Press number pads to select second cook time.
Time Cook II
If power level other than 100% is desired, press POWER
LEVEL pad and number pad. For example, for 20%
power, press 2 pad.
6. Press START pad. Oven stops, signals and "END"
displays at end of cooking time.
When Time Cook I has expired, "TIME COOK II" will be
displayed. If Program cycles are interrupted, close door
and press START pad to resume cooking.
One Step Cook (1-5)
One step process to program oven at full power for 1-5
minutes.
1. Place food in oven. Close door.
2. To select 1 to 5 minutes of cooking time, press desired
number pad (1-5). For example, to cook for 2 min-
utes, press 2 pad. Oven will start immediately.
3. Ovens stops, signals and "End" displays at end of
cooking time.
Oven Operation
• Set Minute Timer
1. Press TIMER pad.
2. Press desired time. For example, for 3 minutes,
press 3,0,0.
3. Press START pad. Display counts down.
Signal sounds and "End" displays at end of time
period.
• Complete Reminder
Reminds user that there is food in oven. "END" is
displayed and oven signals once every minute until
door is opened, or CLEAR/OFF pad is pressed.
Complete Reminder is not adjustable.
• Surface Light
Press ON pad to activate surface light.
Press OFF pad to deactivate surface light.
• Vent Fan
Protects microwave from excess heat rising from
cooktop or range. Fan automatically turns on at low
speed when excess heat is sensed. If excess heat is
sensed fan can't be turned off manually until internal
parts have cooled.
• Set the Clock
1. Press CLOCK.
2. Enter time of day. For example, for 10:35 (a.m or
p.m.), press 1,0,3,5.
3. Press CLOCK pad. Clock is set. Reset or
change time by repeating above steps.
To Next Page
Loading...