Calpeda IDROMAT 3 User Manual

Regolatore elettronico per pompe
Electronic regulator for pumps
Elektronikschaltautomat für Pumpen
Regulateur électronique pour pompes
Regulador electronico para bombas
Elektroniske pumperegulator
ùÎÂÍÚÓÌÌ˚È „ÛÎflÚÓ ‰Îfl ̇ÒÓÒÓ‚
IDROMAT 3
ISTRUZIONI ORIGINALI PER LʼUSO Italiano
ORIGINAL OPERATING INSTRUCTIONS English
ORIGINAL BETRIEBSANLEITUNG Deutsch
INSTRUCTIONS ORIGINALES POUR LʼUTILISATION Français
INSTRUCCIONES ORIGINALES DE USO Español
INSTRUKTIONER INSTALLATION OG BRUG
Danish
àà
ÌÌÒÒÚÚÛÛÍ͈ˆËËËË ÔÔÓÓ ˝˝ÍÍÒÒÔÔÎÎÛÛ‡‡ÚÚ‡‡ˆˆËËËË
êÛÒÒÍËÈ

Calpeda IDROMAT 3 Specifications

General

Maximum current	16 A
Protection degree	IP 65
Maximum liquid temperature	60 °C
Maximum ambient temperature	40 °C
Maximum load current	16 A
Power supply	230 V - 50/60 Hz
Relative humidity	95% non-condensing

Summary

Safety and Compliance

General Safety Precautions

Read instructions, comply with regulations, manufacturer liability disclaimer.

Product Operation

Automatic Control and Startup

Explains automatic pump control and the startup procedure.

Installation and Connections

Hydraulic and Electric Connections

Details hydraulic connection, submersible pump setup, and electric wiring.

Technical Details and Troubleshooting

Specifications and Common Problems

Lists technical specs and addresses common pump operational issues.

Safety Guidelines

General Safety Precautions

Read instructions, comply with regulations, manufacturer liability disclaimer.

Product Operation

Operation Principle and Startup

Explains automatic pump control and the startup procedure.

Installation and Connections

Hydraulic and Electric Connections

Details hydraulic connection, submersible pump setup, and electric wiring.

Technical Information and Troubleshooting

Specifications and Common Problems

Lists technical specs and addresses common pump operational issues.

Automatic Reset Function

Device attempts automatic restarts after a failure (e.g., lack of water).