Calpeda IDROMAT Series User Manual

Regolatore elettronico per pompe
Electronic regulator for pumps
Elektronikschaltautomat für Pumpen
Regulateur électronique pour pompes
Regulador electronico para bombas
Elektroniske pumperegulator
ùÎÂÍÚÓÌÌ˚È „ÛÎflÚÓ ‰Îfl ̇ÒÓÒÓ‚

"L Italiano
 English
 Deutsch
L Français
 Español

Danish
à
ÌÒÚÛ͈ËË ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË
êÛÒÒÍËÈ
IST_IDROMAT5_6 09_2017_istruzioni N, N4 16/10/17 10:25 Pagina 1

Calpeda IDROMAT Series Specifications

General

Frequency	50/60 Hz
Maximum current	16A
Protection degree/rating	IP 65
Application	Pumps
Supply voltage	230V AC
Operating temperature	0 to +50 °C (32 to 122 °F)

Summary

Safety and General Operation

Hydraulic Connection

Connect the device to the pump and network, ensuring correct orientation and connection points.

Electrical and Starting Procedures

Electrical Connection

Connect the device to the power supply according to diagrams, ensuring correct voltage and wiring.

Starting the Pump

Procedure for priming the pump and initial startup, including LED indicators and reset function.

Automatic Restart and Anti-Jamming

Details the device's automatic restart attempts after water shortage and anti-jamming function.

Troubleshooting Possible Problems

Pump Does Not Stop

Identifies causes for the pump not stopping, such as leaks or incorrect connections.

Pump Does Not Start

Diagnoses issues preventing the pump from starting, including water supply and pressure.

Pump Starts and Stops Repeatedly

Addresses frequent pump cycling, often caused by minor leaks in the system.

Declaration of Conformity