77
.............................................................................................................................................................................................................................................
S2
PQ4068 MONO MIC/LINE CHANNEL DIL SWITCHES
SW4 PRE EQUALISER FEED to INSERT GO OUTPUT:-
DOWN = ON = PRE EQUALISER FEED to INSERT GO when no insert selected.
UP = OFF = No feed to INSERT GO when no insert selected.
SW21 LINE 2 to AUXILIARY 8 OUTPUT:-
LEFT = DISABLE
RIGHT = ENABLE = changed by global switching (for MULTITRACK MONITOR).
SW26 DIRECT OUTPUT PRE FADER FEEDS:-
1 = MONO FEED } UP = PRE EQUALISER
2 = Not used } DOWN = PRE FADER (POST EQ).
SW31 PRE FADER FEED to MULTITRACK:-
1 = Panned LEFT FEED } UP = PRE EQUALISER.
2 = Panned RIGHT FEED } DOWN = PRE FADER (POST EQ).
N.B. Mono channels are usually fed only to one track with pan to left for odd and pan to right for even
track numbers.
SW38 P.A. INHIBIT (AUX MUTE):-
UP = ON = AUXILIARY OUTPUTS 1 and 2 switched off as fader is closed.
DOWN = OFF = AUXILIARY OUTPUTS not switched off.
SW42 MIX MINUS BUS 1 OUTPUT FEED:-
LEFT = POST FADER
RIGHT = PRE FADER
SW46 MIX MINUS BUS 2 OUTPUT FEED:-
LEFT = PRE FADER
RIGHT = POST FADER
SW56 LINE 2 REPLAY:-
UP = OFF = Channel input not changed by global switching.
DOWN = ON = Channel input changed to LINE 2 INPUT by global switching.
To Next Page
Loading...
