Calrec S2 - Page 79

79
.............................................................................................................................................................................................................................................
S2
PQ4069 STEREO MIC/LINE CHANNEL DIL SWITCHES
SW4 PRE EQUALISER FEED to INSERT GO OUTPUT:-
1 = LEFT FEED } UP = ON = PRE EQUALISER FEED to INSERT GO when no insert selected.
2 = RIGHT FEED } DOWN = OFF = No feed to INSERT GO when no insert selected.
SW9 PHANTOM POWER:-
1 = MIC INPUT L } UP = OFF
2 = MIC INPUT R } DOWN = ON
SW21 LINE 2 to AUXILIARY 8 OUTPUT:-
LEFT = DISABLE
RIGHT = ENABLE = changed by global switching (for MULTITRACK MONITOR).
SW26 DIRECT OUTPUT PRE FADER FEEDS:-
1 = LEFT FEED } UP = PRE EQUALISER
2 = RIGHT FEED } DOWN = PRE FADER (POST EQ).
SW31 PRE FADER FEED to MULTITRACK:-
1 = LEFT FEED } UP = PRE EQUALISER.
2 = RIGHT FEED } DOWN = PRE FADER (POST EQ).
SW38 P.A. INHIBIT (AUX MUTE):-
UP = ON = AUXILIARY OUTPUTS 1 and 2 switched off as fader is closed.
DOWN = OFF = AUXILIARY OUTPUTS not switched off.
SW42 MIX MINUS BUS 1 OUTPUT FEED:-
LEFT = POST FADER
RIGHT = PRE FADER (MONO FEED).
SW46 MIX MINUS BUS 2 OUTPUT FEED:-
LEFT = PRE FADER
RIGHT = POST FADER (MONO FEED).
SW56 LINE 2 REPLAY:-
UP = OFF = Channel input not changed by global switching.
DOWN = ON = Channel input changed to LINE 2 INPUT by global switching.