What to do if it is impossible to lift or lower the load with cam HS?
If you cannot lift or lower the load, it might be due to air or dirt in the hydraulic system. Bleed the air from the system and cycle the cylinders through several lift cycles. Ensure the hydraulic system is properly connected to prevent blockages and check that it's connected to the correct hydraulic hoses.
Why is my cam Automobile Accessories hydraulic cylinder malfunctioning?
A malfunctioning hydraulic cylinder may be caused by dirt in the hydraulic oil. If this is the case, the oil needs a complete change, which should only be performed by a qualified service technician following the manufacturer's instructions. Another cause may be air in the hydraulic system. If so, bleed the air from the system and run the cylinders through several lift cycles. You should also check the connections and replace the seals. If the above does not help, replace or repair the pump/valve.
General| Night Vision | Yes |
|---|---|
| Waterproof Rating | IP67 |
| Resolution | 1080p |
| Field of View | 170 degrees |
| Storage | Up to 128GB MicroSD card |
| Connectivity | Wi-Fi |
| Compatibility | iOS and Android |
| Battery Life | Up to 30 minutes (internal battery) |
Provides technical specifications including volume, dimensions, and weight for different models.
Identifies and lists the primary components of the hydraulic scoop using numbered diagrams.
Details the correct placement of safety and warning labels on the hydraulic scoop.
Explains the information found on the product's type plate, including model and serial numbers.
Provides essential safety rules and precautions for operating and maintaining the hydraulic scoop.
Instructions for storing the hydraulic scoop in a dry, frost-free environment to prevent damage.
Steps for safely transporting the hydraulic scoop, including securing it and choosing lifting devices.
Lists the items included in the package, ensuring all necessary parts are present.
Highlights crucial safety precautions to be followed during the assembly and installation process.
Details the step-by-step process for physically installing the hydraulic scoop onto the lifting device.
Procedure for removing air from the hydraulic circuit after installation for proper function.
Provides critical safety guidelines for operating the hydraulic scoop to prevent accidents and damage.
Covers load lifting, load handling, and general operating procedures for safe and effective use.
Critical safety precautions to ensure safe practices while performing maintenance on the hydraulic scoop.
Outlines a schedule for various maintenance tasks based on time intervals or usage hours.
Provides detailed instructions for cleaning, lubrication, and checking system components.
Lists common problems, their causes, and recommended actions for resolving issues with the hydraulic scoop.
Presents the EC Declaration of Conformity for the machinery, confirming compliance with EU directives.
Information on how to obtain a detailed hydraulic diagram for service or reference purposes.
Provides a list of spare parts with references, accompanied by diagrams for identification.
To Next Page
