What to do if Camargue Toilets nozzle doesn't spray?
If the Camargue toilet nozzle isn't spraying, first ensure that the water supply is available. If it is, check that the water tap is open. Finally, inspect the nozzle opening to see if it's jammed; if so, clean the nozzle.
Why my Camargue CLEAN & DRY Toilets doesn't operate?
If your Camargue toilet doesn't operate, the issue might be due to a power failure. Check the fuse to ensure it's working correctly. Another possibility is that the toilet is not switched on; in this case, simply turn on the toilet.
How to fix weak water pressure in Camargue CLEAN & DRY Toilets?
If you notice weak water pressure in your Camargue toilet, it could be because the pressure is set at a low level. Try raising the pressure. Another possible reason is that the water intake is blocked, so you should clean up the filter.
Why is the air temperature low in my Camargue CLEAN & DRY?
If the air temperature is too low in your Camargue toilet, it is likely because the toilet is in “no-heating” mode. To fix this, set the air temperature higher.
How to increase water temperature in Camargue Toilets?
If the water temperature isn't high enough in your Camargue toilet, it's probably because the toilet is in “no-heating” mode. You can solve this by setting the water temperature higher.
Why is my Camargue CLEAN & DRY Toilets seat not heating?
If your Camargue toilet seat isn't heating, it's probably because the toilet is in “no-heating” mode. To resolve this, set the seat temperature higher.
What to do if there is no air blowing in Camargue CLEAN & DRY?
If there's no air blowing from your Camargue toilet, it might be because the function has ended. Try restarting the function. Alternatively, the toilet could be in “energy saving” mode. Ensure you are sitting properly on the seat to allow the sensor to work correctly.
Step-by-step instructions for installing the toilet.
How to clean the toilet bowl, seat, and lid properly.
Instructions for cleaning the toilet nozzle using its self-cleaning function.
Solutions for issues related to the toilet not receiving power.
Steps to resolve problems with washing and bidet functions.
Troubleshooting for issues with the warm air drying function.
Solutions for problems encountered with the seat heating feature.
Technical details for the washing unit, including pressure, volume, and temperature.
Specifications for the toilet seat, including heating and soft-close.
Technical data for the warm air drying system.
General| Flush Type | Dual flush |
|---|---|
| Material | Ceramic |
| Color | White |
| Water Consumption | 3/6 liters per flush |
| Seat Material | Duroplast |
| Weight | 25 kg |
| Cistern | Concealed |
| Seat Type | Soft-close |
To Next Page
