Do you have a question about the Cambridge Audio Azur 740C and is the answer not in the manual?
Details the DAC chip and digital signal processing capabilities.
Describes the analog output stage and audio bandwidth.
Specifies THD, IMD, jitter, and output impedance.
Lists supported digital formats and upsampling features.
Provides product size and mass information.
Crucial warnings for safe operation and servicing.
Legal information regarding document usage.
Visual guide to the internal component layout.
Inventory of all parts shown in the exploded diagram.
Schematic of the front panel electronics.
PCB layout for the front panel's top surface.
PCB layout for the front panel's bottom surface.
Component list for the front panel circuit board.
Schematic of the servo control system.
Component placement on the servo board's top.
Component placement on the servo board's bottom.
Component list for the servo circuit board.
Power supply and interface schematics for the DAC section.
Digital audio interface schematics.
Firmware interface and mute function schematics.
Digital Signal Processor (DSP) schematic.
Analog output stage schematics.
Component placement on the DAC board's top surface.
Component placement on the DAC board's bottom surface.
Component list for the DAC circuit board.
Schematic of the AC power input and control circuits.
Component placement on the mains board's top.
Component placement on the mains board's bottom.
Component list for the mains circuit board.
Pin configurations for servo ICs TA2153FN and TC9462FG.
Pin configuration for the main microcontroller.
Pin details for power drivers, regulators, and transistors.
Pin details for various transistors.
Pin details for IR receiver and microcontroller.
Pin details for digital potentiometer and microcontroller.
Pin details for motor driver, transistor, IR receiver, optocoupler.
Pin details for logic gates.
Pin details for multiplexers.
Pin details for logic gates and S/PDIF receiver.
Pin details for S/PDIF transmitter and DSP.
Pin details for voltage regulators.
Details the DAC chip and digital signal processing capabilities.
Describes the analog output stage and audio bandwidth.
Specifies THD, IMD, jitter, and output impedance.
Lists supported digital formats and upsampling features.
Provides product size and mass information.
Crucial warnings for safe operation and servicing.
Legal information regarding document usage.
Visual guide to the internal component layout.
Inventory of all parts shown in the exploded diagram.
Schematic of the front panel electronics.
PCB layout for the front panel's top surface.
PCB layout for the front panel's bottom surface.
Component list for the front panel circuit board.
Schematic of the servo control system.
Component placement on the servo board's top.
Component placement on the servo board's bottom.
Component list for the servo circuit board.
Power supply and interface schematics for the DAC section.
Digital audio interface schematics.
Firmware interface and mute function schematics.
Digital Signal Processor (DSP) schematic.
Analog output stage schematics.
Component placement on the DAC board's top surface.
Component placement on the DAC board's bottom surface.
Component list for the DAC circuit board.
Schematic of the AC power input and control circuits.
Component placement on the mains board's top.
Component placement on the mains board's bottom.
Component list for the mains circuit board.
Pin configurations for servo ICs TA2153FN and TC9462FG.
Pin configuration for the main microcontroller.
Pin details for power drivers, regulators, and transistors.
Pin details for various transistors.
Pin details for IR receiver and microcontroller.
Pin details for digital potentiometer and microcontroller.
Pin details for motor driver, transistor, IR receiver, optocoupler.
Pin details for logic gates.
Pin details for multiplexers.
Pin details for logic gates and S/PDIF receiver.
Pin details for S/PDIF transmitter and DSP.
Pin details for voltage regulators.
| Brand | Cambridge Audio |
|---|---|
| Model | Azur 740C |
| Category | CD Player |
| Language | English |












Loading...