Need help?Do you have a question about the Cambridge Audio DacMagic 200M and is the answer not in the manual?
General| DAC Chip | Dual ESS ES9028Q2M |
|---|---|
| Maximum Resolution | 32-bit/768kHz PCM, DSD512 |
| MQA Support | Yes |
| Output Level | 2.1V RMS (unbalanced), 4.2V RMS (balanced) |
| Digital Inputs | USB, Optical, Coaxial |
| Analog Outputs | RCA, XLR |
| Bluetooth | Yes |
| THD | <0.0005% |
| Power Supply | 12V DC |
| Weight | 1.2 kg |
| Signal-to-Noise Ratio | >115dB (A-weighted) |
Step-by-step guide for connecting the DacMagic 200M to audio sources and amplifiers.
Installing the Cambridge Audio USB driver for Windows PCs to enable USB Class 2.0 audio playback.
Information on using the DacMagic 200M with Mac computers, noting no extra drivers are needed.
Guidance on using the DacMagic 200M with Linux, noting native USB Audio Class 2.0 support.
Explanation of the rear panel Ground/Lift switch for managing potential hum and noise.
Procedure to pair a new Bluetooth enabled device with the DacMagic 200M.
Methods to unpair a device or reset all paired devices on the DacMagic 200M.
Understanding the Bluetooth Source LED indicators for different codec types (SBC, aptX).
Description and theoretical response of the Fast (Linear Phase) digital audio filter.
Steps to perform a factory reset on the DacMagic 200M to restore default settings.
How to switch between fixed and variable output modes for RCA/XLR connections.
Instructions to turn off the Auto Power Down feature.
Instructions to re-enable the default Auto Power Down feature.
Explanation of DacMagic 200M's handling of 32-bit files and USB interface limitations.
Connecting to CXN/851N for MQA passthrough and unfolding using the DacMagic 200M.
Step-by-step guide for installing the Cambridge Audio USB Audio driver for Windows.
To Next Page
