Need help?Do you have a question about the Cambridge Audio Minx X201 and is the answer not in the manual?
Level produced by speaker at one meter, with one watt of power from an amplifier.
A circuit that splits an audio signal into different frequency components for multiple drivers.
Resistance measured at a given frequency, given as a value in Ohms (Ω).
Check amplifier, source selection, subwoofer power, connections, and volume settings.
Confirm secure connections between amplifier, loudspeakers, and source equipment.
Confirm mains connection is secure and the plug is switched on at the wall.
Level produced by speaker at one meter, with one watt of power from an amplifier.
A circuit that splits an audio signal into different frequency components for multiple drivers.
Resistance measured at a given frequency, given as a value in Ohms (Ω).
Check amplifier, source selection, subwoofer power, connections, and volume settings.
Confirm secure connections between amplifier, loudspeakers, and source equipment.
Confirm mains connection is secure and the plug is switched on at the wall.
General| Power Output | 200W |
|---|---|
| Frequency Response | 36Hz - 200Hz |
| Driver | 1 x 6.5" subwoofer |
| Type | Active subwoofer |
| Weight | 5.0 kg |
| Crossover | 200Hz |
| Dimensions | 219 x 210 x 222 mm |
To Next Page
