CAMBRIDGE EM830 Series

To Next Page

WARRANTY

DIGITAL MULTIMETER

EM830 SERIES

TL13712 User’s Manual

110981

ID: 00469

The multimeter has been designed according to

IEC-61010 concerning electronic measuring instruments

with a measurement category (CAT III 300V) and Pollution

degree 2.

This instrument is warranted to be free from defects in

material and workmanship for a period of one year. Any

instrument found defective within one year from the

delivery date and returned to the factory with transpor-

tation charges prepaid, will be repaired, adjusted, or

replaced at no charge to the original purchaser. This

warranty does not cover expandable items such as

battery or fuse. If the defect has been caused by a

misuse or abnormal operation conditions, the repair will

be billed at a nominal cost.

SAFETY INFORMATION

WARNING

To avoid possible electric shock or personal injury, follow

Main Page

Need help?

Do you have a question about the CAMBRIDGE EM830 Series and is the answer not in the manual?

Summary

Safety Guidelines and Warnings

Meter Instructions

Product Specifications

DC Voltage Specifications

Details input impedance, max allowable voltage, range, resolution, accuracy, and overrange indication.

AC Voltage Specifications

Lists input impedance, frequency range, response, max allowable voltage, and measurement parameters.

DC Current Specifications

Resistance Specifications

Operating Instructions

Measuring DC Voltage

Guides on connecting leads, setting range, and reading DC voltage measurements.

Measuring AC Voltage

Instructions for connecting leads, setting range, and reading AC voltage measurements.

Measuring DC Current

Details on connecting leads for different current ranges and circuit setup.

Measuring Resistance

Steps to connect the meter and measure resistance, including notes on high resistance.

Maintenance and Care

Battery and Fuse Replacement

Guidance on replacing the battery and fuses, including specifications and warnings.