CAMBRIDGE Sanoma - User Manual

Installation and Operation Instructions
ELECTRIC FIREPLACE
XINS2318-1 XINS2318-2LOG

Summary

Important Safety Instructions

Listing Approvals

Operating Instructions

Care and Cleaning or Maintenance

Procedures for cleaning and maintaining the electric fireplace.

Control Buttons and Functions

Remote Control Operation

Maintenance

Flame Effect;Light Bulb Replacement

Steps to replace the fireplace's light bulbs.

Troubleshooting

Installation

Planning Installation

Guidance for preparing and planning the installation process.

Installation Requirements

Lists necessary tools, hardware, and package contents for installation.

Assembly

Inserting the Firebox

Instructions for inserting the firebox into the mantel.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides installation and operation instructions for the XINS2318-1 and XINS2318-2LOG electric fireplaces. It emphasizes important safety information, operational guidelines, and maintenance procedures to ensure safe and effective use.

Function Description:

The XINS2318-1 and XINS2318-2LOG are electric fireplaces designed to provide a simulated flame effect and supplemental heating. They feature a fan-forced electric heater with two heat settings (800W and 1500W) and a timer function. The fireplaces are intended for indoor use and require a fireplace mantel for installation. The simulated flame effect is created by illuminating light bulbs, providing an aesthetic appeal similar to a traditional fireplace without the need for burning wood or other materials. Both models include control buttons on the unit and a remote control for convenient operation.

Important Technical Specifications:

• Model Numbers: XINS2318-1, XINS2318-2LOG
• Description: Electric Fireplace
• Voltage: 120V AC, 60Hz
• Watts: MAX 1500W
• Length: 23.0"
• Height: 5.0"
• Depth: 17.1"
• Heater Settings: 800W (Low) and 1500W (High)
• Timer Range: 1 hour to 9 hours
• Light Bulbs for Flame Effect: (2) clear 120V, 25-watt E-12 (small base, chandelier candle type) light bulbs. Do not exceed 25 watts per bulb.
• Power Cord: 3-prong grounding plug. If an extension cord is used, it must be No.16 AWG minimum size, rated not less than 1875 Watts, a 3-prong grounding type, and not exceed 20 feet (6m) in length.
• Approvals: Tested in accordance with CSA Standards.

Usage Features:

• Control Buttons: The main control buttons are located on the top right corner of the front insert. A master power button is located on the top left corner of the front insert.
• Display Window: A digital screen displays current settings for heater and timer functions.
• Heater Settings: Users can cycle through "Lo" (800W), "HI" (1500W), and "Off" settings by pressing the heater button. The fan may continue to run for a short time after the heater is turned off and will shut off automatically.
• Timer Function: An integrated timer allows users to set the fireplace to operate for a duration ranging from 1 to 9 hours. The digital screen will display "1H" to "9H" for the selected time.
• Power ON/OFF Button: This button controls all functions of the fireplace. The Master Power Button must be "On" for the unit to operate.
• Remote Control: The fireplace comes with a remote control that requires two AAA batteries (included). A master button on the top left side of the insert must be "On" to enable remote control functionality. The remote allows users to power on/off, adjust heater settings (800W, 1500W, Off), and set the timer (1-9 hours). When heater settings are active, the remote also displays available Fahrenheit degrees.
• Installation: The firebox is inserted into a mantel from the rear. Metal brackets and screws are used to secure the firebox within the mantel, ensuring stability. Trim pieces are attached to the firebox and mantel front using screws.

Maintenance Features:

• General Cleaning: Before cleaning, turn the heater OFF and unplug it from the electrical outlet. Allow the appliance to cool for at least 10 minutes. Keep combustible materials at least 3 feet (0.9 meters) away from the fireplace. Use a vacuum or duster to clean heat and vent areas. The exterior should be cleaned with a damp cloth or duster; avoid abrasive cleaners or liquid sprays.
• Light Bulb Replacement: The flame effect light bulbs may need replacement over time. To replace them:
  1. Turn off power and unplug the insert.
  2. Slide the fireplace mantel away from the wall to access the back.
  3. Locate the access panel on the back of the insert.
  4. Remove screws in the access panel using a Phillips screwdriver.
  5. Open the door and replace the light bulbs. It is recommended to replace both bulbs at the same time.
  6. Reinstall the access panel by reversing steps 1-4. Note: Replacement light bulbs are not supplied by the manufacturer but can be purchased at home centers or hardware stores.
• Troubleshooting: A troubleshooting guide is provided to address common issues such as no power, indicator lights on but no flame effect, log glow but no flame, or flame and logs glow but no heat. It advises checking power connections, circuit breakers/fuses, light bulbs, flame spinner connections, and heater switch settings. For persistent issues or electrical repairs, it strongly recommends contacting a qualified professional.
• Safety Warnings: The manual emphasizes critical safety precautions, including not operating the heater with a damaged cord or plug, avoiding outdoor use, keeping combustible materials away, and ensuring proper grounding. It warns against opening the back panel or performing electrical repairs unless qualified. Discontinue use if water damage, dropping, denting, hot power cord, or smoke/smell occurs.

CAMBRIDGE Sanoma Specifications

General

Brand	CAMBRIDGE
Model	Sanoma
Category	Indoor Fireplace
Language	English