Camco eaz lift 48475 - User Manual

MODEL #48475
™
WARNING
Tools for Installation
• (2) 13mm wrench
• (2) 17mm wrench
• Appropriate safety protection (gloves, eye
protection, etc.)
OR
• (2) Adjustable wrenches, 0 to 30mm
• The maximum weight capacity is 500 pounds
• Do Not Exceed vehicle or hitch manufacturer’s maximum tongue weight rating
• For use with Class III or better 2” hitch receiver only
• Distribute loads evenly. Do not load heavy objects toward the edges of the rack
• Do not load objects that overhang the rack's side rails
• Not for transport of people, animals, or flammable liquids
• Do not load items in close proximity to the exhaust pipe. If exhaust pipe extends toward the rack an
angled or curved exhaust tip must be used to redirect exhaust away from the cargo carrier
• Securely fasten cargo to the carrier
• Carrier should not be used if carrier is wider than the vehicle
• If carrier or cargo block license plate the license plate should be relocated to a more visible location
• Do not block rear tail lights with the carrier or cargo
CAUTION: CAMCO CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGES DUE TO IMPROPER
USE OR INSTALLATION OF THIS PRODUCT. CAMCO CANNOT BE
HELD ACCOUNTABLE FOR THE
STRUCTURAL INTEGRITY OF ANY FRAME.
NOTICE
If product components
are missing or damaged
do not return to
dealer, contact the
manufacturer.
1-800-334-2004
Installation Instructions
No. Description Qty.
1 Post 1
2 Basket 2
3 Cross Brace 2
4 Hitch Pin 1
5 Spring Clip 1
6 M8X35 Bolt 4
7 M8 Washer 4
8 M8 Lock Nut 4
9 M10X75 Bolt 4
10 M10 Washer 4
11 M10 Lock Nut 4
Includes:
HITCH MOUNT
CARGO CARRIER
WARNING: READ THE FOLLOWING
INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING INSTALLATION.
2
1
4
3
5 6 9
10
11
7
8
Rear >

Summary

Cargo Carrier Installation and Safety

Critical Safety Warnings

Provides essential safety guidelines, weight limits, and usage restrictions for the cargo carrier.

Tools and Preparation for Installation

Lists the required tools and personal safety equipment needed for the installation process.

Manufacturer Contact for Component Issues

Instructions on contacting the manufacturer for missing or damaged product components.

Cargo Carrier Assembly Steps

Align Baskets and Post

Step-by-step guide for aligning the basket components and the carrier post during assembly.

Secure Hitch Pin and Spring Clip

Instructions for securely attaching the carrier to the vehicle's hitch receiver.

Limited Warranty Information

Camco eaz lift 48475 Specifications