CamCuddle W8 User Manual

CAMCUDDLE W8
VIDEO SHOOTING PEN USER MANUAL
I. PRODUCT DETAILS
II. OPERATION INSTRUCTIONS
HOW TO CHARGE THE CAMERA
Please charge the camera before use it for the first time
1. Open the pen and use the provided USB cable to charge the camera
2. The indicator light (5) would be solid blue while charging. Once the battery is full, the indicator light turns
to red and blue. It usually takes about 2 hours for a full charge
HOW TO RECORD VIDEO
1. Insert the micro SD card into the micro SD card slot by the direction
shown in the right image
2. Press and hold the top function On/Off button (1) until the blue
indicator turns on. The blue indicator light will flash 2 times then the
pen starts recording automatically. The blue indicator light is off when the recording is going on
3. To stop recording, press the top button 1 time. The blue light turns on and stays solid and the camera is
turned into the standby mode. To restart the recording again, press the top button once.
Notice:
▪ When the camera is in the standby mode, if no operation is made within 30 seconds then the camera shut
down automatically
▪ If the camera is on but there is no micro SD card inserted, the red and blue lights flashes for 4 seconds at
the same time and the camera automatically goes off

CamCuddle W8 Specifications

General

Brand	CamCuddle
Model	W8
Category	Security Camera
Language	English

Summary

Product Details

Operation Instructions

How to Charge the Camera

Instructions on charging the device before first use, indicating indicator light behavior during charging.

How to Record Video

Steps to insert SD card, start, and stop video recording, including indicator light behavior and important notices.

How to Take Photo

Steps to take photos, including standby mode and indicator light feedback.

How to Turn Off Camera

Procedure to power down the device by holding the button until the indicator light flashes.

How to Reset Camera

Instructions on how to reset the device using the provided pin if it malfunctions.

How to Add Record Time for Video and Picture Files

Guide to setting the date and time for recordings by modifying a text file on the SD card.

Safety and Precautions

Product Support