CAME FLUO-SL - Emergency Exit Sensor Connection

FA00150-EN v.7 - 06/2017
24
CAME S.p.A.
12.6 ELECTRICAL CONNECTION OF OPENING AND SAFETY SENSOR FOR EMERGENCY EXIT 001MR8700
Connect the sensor A side, using the supplied cable to the terminals of the electronic control, as follows:
CB01E
001MR8700 sensor (output=current)
Notes
OPENING
0
Brown
1
Green
R0
White/Black
Remove the jumper
R1
Yellow/Black
Remove the resistor
SAFETY
0
Blue
1
Pink
8A
Gray
Remove the jumper
41
Red
White
Do not connect
Yellow
Do not connect
Connect the sensor B side, using the supplied cable to the terminals of the electronic control as indicated in Section 12.5. For
more information, check the installation manual of the sensors.