CAME FLUO-SL - Sizing Frame System; Sizing for 2 Sliding Doors

FA00150-EN v.7 - 06/2017
6
CAME S.p.A.
4. SIZING FRAME SYSTEM FOR SLIDING DOORS
The correct sizing of an automatic sliding door depends on the size of the compartment wall and the present encumbrance.
The following tables provide the installation measurements refer to the codes list (considering perimeter profiles and
overlaps average), are also indicated the applied formulas to obtain the installation measurements based on the actual
dimensions of the wall and frame systems.
To facilitate the calculations and the choice for the ordination of automatic sliding doors, CAME S.p.A. has developed the
CAME DoorConfigurator computer program.
4.1 SIZING FRAME SYSTEM FOR 2 SLIDING DOORS
Ld = La + 2Lm + 20 automation length
La = 2Lm + Loc – 2Loo width of the doorway
Lm = (La – Loc + 2Loo) / 2 leaf width
Loo = overlapping open side door (depending on the type of used frame system)
Loc = overlapping closes side door (depending on the type of used frame system)
A = Ld/2 – La/2 – 350 = positioning of the transmission unit (maximum size)
B = Ld/2 – La/2 – 340 = positioning of the drive unit (maximum size)
C = Ld/2 – 70 = positioning of the locking device
Length of belt = (Ld – A – B – 65) x 2 (minimum length)
Code
Ld
La
Lm
A (max)
B (max)
C
Belt (min)
001FL2S20
2000 mm
940 mm
2 x 520 mm
180 mm
190 mm
930 mm
3130 mm
001FL2S22
2200 mm
1040 mm
2 x 570 mm
230 mm
240 mm
1030 mm
3330 mm
001FL2S26
2600 mm
1240 mm
2 x 670 mm
330 mm
340 mm
1230 mm
3730 mm
001FL2S30
3000 mm
1440 mm
2 x 770 mm
430 mm
440 mm
1430 mm
4130 mm
001FL2S33
3300 mm
1590 mm
2 x 845 mm
505 mm
515 mm
1580 mm
4430 mm
001FL2S36
3600 mm
1740 mm
2 x 920 mm
580 mm
590 mm
1730 mm
4730 mm
001FL2S40
4000 mm
1940 mm
2 x 1020 mm
680 mm
690 mm
1930 mm
5130 mm
001FL2S44
4400 mm
2140 mm
2 x 1120 mm
780 mm
790 mm
2130 mm
5530 mm
001FL2S50
5000 mm
2440 mm
2 x 1270 mm
930 mm
840 mm
2430 mm
6130 mm
001FL2S66
6600 mm
3240 mm
2 x 1670 mm
1330 mm
1340 mm
3230 mm
7730 mm
(N.B. Values shown are calculated considering Loo = 50 mm e Loc = 0 mm)