10
EN
The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at
any time without prior warning
EXAMPLE 2: INSTALLED SYSTEM WITH TOP AND TAM TRANSMITTERS.
Scope: to add a new automation device with Key-Block mode transmitter.
Steps to follow:
- insert the AF43TW frequency card in the automation devices to be used with the Key-Block encoded
trasmitters.
- insert the password on a TWIN transmitter as per pag. 4-5.
- memorise the encoding on the receiver of the automation with the new AF43TW card (see relative
instructions).
- duplicate the TWIN transmitters in Key-Block mode as per pag. 6-7.
- duplicate the TOP and TAM encoding on a button of the TWIN transmitter (see procedure on the TOP
and TAM ticket).
In this way, anybody needing a copy of the TWIN transmitter to command the barrier will have
to address the installer or dealer that has the password.
To Next Page
Loading...
