6
EN
The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at
any time without prior warning
4 Key-Block mode duplication
To duplicate the buttons from a TWIN transmitter in Key-Block mode to another TWIN transmitter:
1 - Set the password on the already active transmitter (to allow
copying onto the new transmitter).
2 - On the new transmitter press buttons P1 and P2 simultaneously until the LED fl ashes more quickly;
3 - then press the button you wish to activate (the LED stays on);
4 - within 10 seconds rest the already encoded transmitter, to its back part, while pressing the button you
wish to duplicate for a few seconds.
Once memorised, the LED on the just-activated transmitter will fl ash 3 times.
Repeat 2, 3 and 4 for the other buttons as well.
1
To Next Page
Loading...
