8
EN
The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at
any time without prior warning
5 Application examples
Example 1: INSTALLED SYSTEM with TOP or TAM transmitters.
Scope: to transform the entire system into Key-Block mode
Steps to follow:
- replace the (AF43S) frequency card in the automations, with the new AF43TW.
- insert the password into a TWIN transmitter as per pag. 4-5.
- memorise the new encoding on the automation receivers with the new AF43TW card (see relative
instructions).
- replace the TOP and TAM transmitters, duplicating the TWIN in Key-Block mode as per pag. 6-7.
In this way, anybody needing a copy of the TWIN transmitter to command the automation device,
will have to address the installer or dealer that has the password.
To Next Page
Loading...
