28
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors
in a DMX chain is possible
with suitable adapters.
PIN ASSIGNMENT
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
PIN ASSIGNMENT
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.
TECHNICAL DATA
Product number: CLPFLATPRO7G2 CLPFLATPRO12G2 CLPFLATPRO18G2
Product type: LED spotlight
Type: Outdoor spotlight
Colour spectrum: RGBWA
Number of LEDs: 7 12 18
LED type: 10 W
LED PWM frequency: 650 Hz, 1530 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25 kHz (adjustable)
Beam angle
(half-peak divergence):
33.5° (18.5°)
DMX input: 3-pin male
DMX output: 3-pin female
DMX modes: Without DMX delay channel: 1-channel, 3-channel 1, 3-channel 2,
5-channel 1, 5-channel 2, 10-channel, 13-channel
With DMX delay channel: 2-channel, 4-channel 1, 4-channel 2,
6-channel 1, 6-channel 2, 11-channel, 14-channel
DMX functions: Dimmer, fine dimmer, strobe, RGBWA, colour temperature, colour
presets, chaser selection, colour mode fading, system setting,
DMX delay
Control: DMX512, RDM
Standalone functions: Auto programs, static, CCT mode, colour presets, user colours,
loop function
Operating elements: Mode, Enter, Up, Down
Display elements: OLED display
Operating voltage: 100–240 V AC/50–60 Hz
Power consumption: 60 W 110 W 170 W
Luminous flux: 2400 lm 4300 lm 6600 lm
Calibration modes: Calibrated, RAW, User
To Next Page
Loading...
