ID setting
Click "read", camera ID, police ID, user name and department name are can
be checked, if need to revise those information, type them directly to the
corresponding columns, then click "setting".
Password Setting
User and administrator can revise camera password here, remember to click
"setting" after revising. (In user mode, it can revise common user's login
password only, but in administrator mode, it can revise the all passwords.
And please be noticed that that six digit number is needed, otherwise it will
cause problems to device)
Enterto U-disk mode
Click "enter to U-disk", it will cut off the connection with management
software and enter to U-disk, data's delete and transfer are allowed in this
mode.
Page up/Exit
Click "page up", system will back to login interface.
Click "exit", it will cut off connection and exit system directly.
18
To Next Page
Loading...