Camo LEVER - CAMO LEVER: Lock-in Grooved Boards & Clips; Set Joist Type and Width; Position and Lock LEVER; Apply Pressure and Fasten

How To Use the LEVER™
800-968-6245 • INFO@CAMOFASTENERS.COM • WWW.CAMOFASTENERS.COM
GRAND RAPIDS, MI 49519
WWW.NATIONALNAIL.COM
Apply pressure by moving the handle towards
the deck board. Do not over-tighten as the
boards can buckle.
Leave LEVER in place until all clips are
fastened.
Place LEVER on the joist and tighten
the joist cam with the Pivot Pin.
A - Loosen joist knob until the stop
block disengages.
B - Rotate block so the word on the
side facing the joist cam matches
the joist material.
4
2
Adjust the stop block to the proper joist width and tighten the knob.
SET THE JOIST TYPE -
WOOD OR METAL
SET THE JOIST WIDTH
LOCK-IN FASTENPOSITION
REMOVE
3
1
7
RELEASE
6
SINGLE JOIST DOUBLE JOIST
A
A
B
5
LOCK-IN GROOVED BOARDS & CLIPS
Loosen the joist cam and remove
LEVER.
Release pressure by moving the
handle away from the deck board.