Need help?Do you have a question about the Camoga C 420 and is the answer not in the manual?
General safety instructions for operating the machine.
Rules for safe and suitable use of the machine.
Contact information for assistance and troubleshooting.
Explains the manual's purpose and content structure.
Recommendations for optimal machine use and maintenance.
Congratulates the user and introduces the machine's features.
Details the machine's technical specifications.
Provides the physical dimensions of the machine.
Information on the machine's acoustic features and standards.
Describes different models (C 420 R, L, X) and their features.
Lists optional accessories available for the machine.
Details the items included in the machine's supply.
Explains the intended use and capabilities of the splitter.
Details packing features and crate types for safe transport.
Instructions for safely unpacking the machine.
Safety precautions during handling and transport.
General guidelines for installing the machine.
Checks to perform before electrical connection.
Instructions for connecting the machine to the power supply.
Steps before initial operation and basic cleaning.
Detailed cleaning steps for preparation.
Checks before starting the machine operation.
Explains the function of various buttons and displays.
Describes alarms and messages for the C 420 R model.
Describes alarms and messages for C 420 L/X models.
Instructions on how to start the machine for different models.
Procedure for sharpening using corundum stones.
Process for dressing sharpening stones.
How to check and adjust bevel symmetry.
Procedure for sharpening using diamond stones.
How to set the desired splitting thickness.
Instructions for setting the bottom feed roll.
How to adjust the pressure of the bottom feed roll.
Daily and weekly cleaning procedures.
Fundamental rules for maintenance and repair.
Step-by-step guide for replacing the knife.
Procedure for replacing the grinding stones.
How to replace the knife guide gibs.
Replacing the upper knife back guide.
Replacing the lower knife back guide.
Instructions for tensioning various belts.
Calibrating the thickness readout.
Swapping bottom feed rolls.
Maintenance of the scrap exhaustor system.
Regular maintenance tasks and part replacement schedule.
Troubleshooting common issues with their causes and solutions.
Troubleshooting electrical problems for C 420 R.
Troubleshooting electrical problems for C 420 L/X.
Diagnosing inverter display alarms.
Definition of mechanical backlash.
Definition of a bevel.
Definition of an inverter.
Definition of a microprocessor.
Definition of a potentiometer.
Definition of a sensor.
Information on how to order spare parts.
Example of how to specify part orders.
List of parts for Table 1.
List of parts for Table 2.
List of parts for Table 3.
List of parts for Table 5.
List of parts for Tables 6-7.
List of parts for Table 9.
List of parts for Table 10.
List of parts for Table 11.
List of parts for Table 12.
List of parts for Tables 13-14.
List of parts for Table 15.
List of accessories with part numbers.
List of options with part numbers.
General| Category | Media Converter |
|---|---|
| Model | C 420 |
| Fiber Ports | 1 |
| Ethernet Ports | 1 |
| Wavelength | 1310nm |
| Transmission Distance | 20km |
| Fiber Type | Single Mode |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
To Next Page