CAMPAGNOLO EPS V4 - User Manual

COMPONENTS
INSTALLATION OF THE INTERFACE UNIT V4 (INTERNAL)
INSTALLATION - Rev. 00/ 06-2019 1
WARNING!
THIS TECHNICAL MANUAL IS INTENDED FOR USE BY PROFESSIONAL MECHANICS.
Anyone who is not professionally qualied to assemble bicycles should not attempt to install and operate on the components because of the risk of carrying out incor-
rect operations that could cause the components to malfunction with the consequent risk of accidents, physical injury or even death.
The actual product may dier from what is illustrated, as the specic purpose of these instructions is to explain the procedures for using the component.
1 – COMPATIBILITY
WARNING!
This Interface Unit V4 is not compatible with Bar-End controls or Bar-End brake controls.
2 - INTERFACE WITH THE FRAME
2.1 - SPECIFICATIONS FOR FRAME INSTALLATION
Note: where not specied, all measurements are expressed in millimetres.
15,3
9
3,5
27
Ø 19
27,6
49
35,5
M3
36
1

Summary

1 - COMPATIBILITY

2 - INTERFACE WITH THE FRAME

2.1 - SPECIFICATIONS FOR FRAME INSTALLATION

Provides the required measurements and specifications for proper frame integration.

3 - INSTALLING THE INTERFACE UNIT V4

3.1 - TOOLS AND ACCESSORIES

Lists the essential tools and accessories needed for the installation process.

3.2 - HANDLEBAR INSTALLATION

Details the steps for installing the unit within the bicycle's handlebar.

3.3 - FRAME INSTALLATION

Explains the process of physically mounting the unit onto the bicycle frame.

CAMPAGNOLO EPS V4 Specifications

General

Brand	CAMPAGNOLO
Model	EPS V4
Category	Recording Equipment
Language	English